#Mityvac fluid extractor series

Each unit is fitted with a brass check valve to prevent backflow during operation, as well as an integral shut off valve that connects at The adapter will connect to any 3/8' NPT port. To begin extracting fluid, simply attach the appropriate adapter to the spout and apply vacuum pressure. This workhorse tool's lightweight yet durable design allows for convenient operation and transport, making the process of filling a reservoir a simple task. The 1.5 Liter MityVac® fluid extractor allows you to quickly and easily remove fluids, such as transmission or power steering fluid, from hard-to-reach reservoirs. These include: P100 pressure regulator, 8.5' tubing and 12' vacuum hose. This version of the Fluid Extractor includes a male 1/2' NPT Adapter for attaching to various MityVACs in the T-series Pressure Regulators. MityVac's 1.5 L Fluid Extractor, ideal for using with transmission fluid, brake fluid, refrigerant and other pressurized liquids up to 150 PSI. If a refill is needed, simply remove the end cap and add fluid.'' The Automatic Fluid Extractor / Dispenser extracts ATF Fluid from Rear Axles, Jacks.

#Mityvac fluid extractor series

Our UltraPro series accessories include variable speed control (300-1400 psi) and a handy quick connect/disconnect air hose fitting. With this complete package, no other tools are required to remove ATF/Transmission fluid or power steering fluid from a car, truck, SUV or Tractor. With one accessory kit the Mityvac® 1.5L Fluid Extractor makes it easy to remove fluids from virtually any system.

Our new 1.5L Fluid Extractor / Dispenser is compact enough to fit in your pocket, and the integrated Teflon lined plunger will extract any fluid from automotive or marine fluid systems. The Mityvac ATFPACK is a 1.5 liter fluid extractor/dispenser with an ATF adapter connector. It is convenient for refilling transmissions, hydraulic circuits and power steering systems without tools. It can be used as a dispenser just remove the valve and fill up any empty areas in containers or bottles. The unit drains easily when disconnected without spilling fluid or requires continuous grip strength to keep draining. Complete with filter, tubing and adapters, this extractor has a valve that allows trapped fluids to be released. Remove stubborn fluid from hard-to-reach places with less effort and in half the time with the 1.5L Fluid Extractor/Dispenser w/ATF Adapter Connector. But it wasn’t a ton of money.maybe $150? I can’t remember.1.5L Fluid Extractor / Dispenser with ATF Adapter Connector And it seems to have lost suction over the years (3 years old now). Now I do have a few at my shop.one air driven, but it quickly developed issues with the on/off valve. I know you can put extensions on the vac tube, I don’t have it. And because of the angle, the tube that attaches to the vac tends to bend and wants to come out. I find part of the problem with using these things is the length of the suction tube - they’re not long enough to go down that dipstick tube and allow the MityVac to sit on the floor - so I have to put it up in the engine compartment and have it lean on it’s side between the radiator and engine. Then again it was 8.4 quarts of oil and I had to empty it once. It has a T handle directly coming out of the reservoir up top.